Alto Professional TS308 Powered Speaker 8inch 2000W Active

The all-new Alto Professional TS3 Series of professional loudspeakers

deliver solutions for every

performance and installation challenge. With 2000 watts of explosive

bi-amplified power and

newly-designed transducers, these speaker systems deliver truly

high-performance audio, without

compromise or restriction. Their elegant industrial design,

lightweight but rugged construction,

versatile mounting/placement application and intuitive user

interface achieves a level of excellence

and refinement that exceeds expectations. Specifications:

2000 W peak (1300 LF + 700 HF) 1000 W

continuous RMS (650 LF + 350 HF)

8-inch (203 mm) LF driver, 2.5-inch (63.5 mm) high-temperature voice coil

1.5-inch (38 mm) voice coil, neodymium magnet HF driver, with precision wave

guide

High quality, lightweight, cabinet design for easy transport, set up and

installation

Pole-mountable, wedge monitor, bracket installation or flown application with

integral

M6 suspension points

Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs,

independent level

controls, XLR Link output, Contour EQ switch and Ground-Lift switch

Custom engineered high-efficiency class D amplifiers with passive cooling design

No fan

means the speaker runs cleaner, quieter and has greater long-term reliability

Design Origin: Designed and tuned in the USA

Output Power: 2000 W peak (1300 LF + 700 HF)

1000 W continuous RMS (650 LF + 350 HF)

LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (63.5 mm) high-temperature voice

coil

HF Driver: 1.5-inch (38 mm) voice coil, neodymium magnet HF driver, with

precision waveguide

Crossover: 2.5 kHz

Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)

Frequency Response: 62 Hz20 kHz (+ 3 dB)

Frequency Range: 52 Hz22 kHz (-10 dB)

Horn Coverage: 90 H x 60 V nominal

Equalization: Contour Switch Low and High Frequency +3dB Boost

Connectors: (2) XLR/TRS 1?4 (6.35 mm) combo inputs, (1) XLR link output, (1)

IEC power cable input

Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch

Indicators: 2 x Power LED (front and rear), Clip limiter LED

Protection: Electronic clip, Thermal and transducer overdrive protection

Power Connection: IEC with Mains Fuse

AC Voltage Input: 100,110120,220240 V, 50/60 Hz

Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with

perforated steel grille

Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using

TSB810 bracket,

Flown application with integral M6 suspension points, Wedge monitor

Dimensions (WxDxH): 10.3 x 9.6 x 17.2 / 261 x 244 x 437 mm

Net Weight: 20.22 lbs. / 9.17 kg.

Design Origin: Designed and tuned in the USA

Accessories: TSB810 Bracket, TS208 Cover