Walrus Audio Fundamental Series Overdrive Pedal

The Fundamental Drive is a versatile overdrive that allows for a wide range of tones thanks to its 3-mode switch. This is the perfect tool at the front of your chain to set the tone for your whole rig.

Gain The Gain slider sets the amount of gain applied to your guitar signal passing through the overdrive circuit.

Tone The Tone slider controls the amount of high-frequency level reduction

Volume The Volume slider sets the overall output volume of the pedal.

Slide Switch The slide switch allows you to change between 3 distinct flavors of the pedal. Each position has different clipping modes or tone profiles.

• Smooth – A classic soft clipping silicon overdrive. Clean and smooth
• Crunch – Silicon soft clipping with added hard clipping silicon diodes and a slight low end boost. Crunchy and edgy
• Bright – Silicon soft and hard clipping from the Crunch mode with a pre-clipping low end cut. Bright and glassy

Bypass Switch Turns the effect on and off.

Bypass LED – Illuminated when the effect is engaged.

Input Jack – 1/4 inch cable from instrument.

Output Jack – 1/4 inch cable to amplifier.

9v Jack 9-volt DC, Center Negative, 100mA min.